Aryam Energy
1 / 5
The first step in installing a ground mount solar system is to install the ground screws. These screws are used to anchor the support structure to the ground. The screws are drilled into the soil using specialized equipment. The depth of the screw depends on the soil type, and it must be sufficient to hold the weight of the entire system.
Once the ground screws are in place, the support structure can be assembled. Most ground mount solar systems use pre-fabricated support structures that can be assembled on-site. The support structure consists of vertical posts and crossbars that connect the posts. The panels will be mounted on the crossbars.
The next step is to install the rails onto the crossbars. The rails are used to hold the solar panels in place.
The final step is to install the solar panels onto the rails. The panels are attached to the rails using clamps.
| Parameter | Specification Detail |
|---|---|
| Material | Structure: AL-6005-T5 (Anodized) | Components: SUS304 & AL-6005-T5 (Anodized) |
| Application | Commercial and Residential installation |
| Tilt Angle | 0-60° |
| Wind Speed | 0-60 m/s |
| Snow Load | 0-150cm |
| Ground Clearance | 0-1m |
| Design Standard | AS/NZS 1170, DIN 1055, JIS C8955: 2017, International Building Code IBC 2009 |
| Warranty | 12 years |
We are committed to developing solar clean energy mounting systems, including Solar Ground Mounting Systems, Solar Agriculture Greenhouse Mounting Systems, Solar Tile Roof Mounting Systems, Solar Metal Roof Mounting Systems, Flat Concrete Roof Mounting Systems, Solar Carport Mounting Systems, Solar Fences, and Mounting Accessories. Our products are widely used across Europe, Southeast Asia, the Middle East, Southern Africa, and Latin America, providing clean, renewable energy worldwide.
Workshop - Aluminum Material: We operate a professional aluminum alloy product processing workshop where cutting, drilling, stamping, forging, and other processes are completed independently. The professional production team handles products with high customization and precision requirements.
Workshop - Steel Material: We also run a professional steel / Magnesium-Aluminum-Zinc / S350GD / S450GD processing workshop featuring 6 production lines and several molding machines. Depending on different project demands, it handles cutting and hole processing with a productivity of 40-50MW per month.
