Aryam Energy
1 / 5
RoHS-compliant AL6005 aluminum alloy rooftop PV mounts - high strength, environmental compliance, full-scene adaptability.
Designed for harsh environments, the solar PV racking system adopts AL6005-T5 aluminum alloy body and dynamic stress dispersing structure, and has passed RoHS certification (10 hazardous substances testing such as lead and cadmium). The system is suitable for metal roofs, concrete tiles, color steel tiles, and other substrates. Passed the mechanical strength test and environmental protection certification, supporting -40°C to +75°C wide temperature range operation. Single group load capacity up to 120kg, tilt angle adjustment range 0° to -35°, life time more than 25 years.
| Solar Rail Material | AL6005-T5 |
| HOOK | Stainless Steel |
| Parts List | Guide rails, screws, nuts, connectors, clamps, etc. |
| MOQ | 1000 Watts |
| Ballast Pile Foundation | square cement pile |
| Installation Angle | 0-45° |
| Service Life | 25 year |
High Strength and Light Weight: AL6005-T5 has 18% higher yield strength than traditional 6063 aluminum alloy, with density reduced to 2.7g/cm³, reducing transportation cost by 25%
Wind Reveal Resistance Dynamic wind pressure balance design, dynamic wind load test, displacement ≤1.8mm
Corrosion resistance: anodized layer self-repair technology, salt spray test ≥1,500 hours
Tool-free snap: patented SnapLock quick release structure, single person 10 minutes to complete the installation of a single group.
Confirm roof loading ≥120kg/m², measure available space
Position rails every 0.8m along the ridge, use negative pressure adsorption base (no drilling required)
Quick release clips to connect PV panel frames, torque wrench calibrated to 10Nm
Get the best inclination solution (based on real-time sun trajectory data)
Challenge: Roof loading ≤150kg/m², annual rainfall 1,200mm
Solution: Wind-resistant ballast block + waterproof sealing system, 5MW system with zero leakage record
Challenge: Medieval limestone roof conservation requirements, cultural heritage restrictions
Solution: Non-contact negative pressure adsorption bracket, certified for heritage restoration
Challenge: Roof space ≤ 0.5m²/kW, slope ≤ 10°
Outcome: Vertical stacked layout, only 98kg/m² increase in roof load, 15% increase in annual power generation
Yes! The main frame, fasteners, and sealing tape are all RoHS 2.0 tested and lab reports are available.
Each kW system requires ≥0.3m x 0.8m of vertical space, and the recommended roof slope is ≤15°.
We can provide customized fixture service and complete the curved roof adaptation solution within 72 hours.
Through dynamic wind tunnel test, the maximum displacement of the bracket is verified to be ≤1.8mm.
Check the fastener tightness every six months, and maintain the anodized layer with nano-coating spray every year (can extend the life by 30%).
Designed with high-quality AL6005-T5 aluminum alloy and corrosion-resistant components, the system has a service life of over 25 years.
